Standing seam metal for an energy retrofit
The owners wanted the cooling bill down and the roof to be the last one they ever bought. Standing seam in a light finish, over a fully vented deck.
The problem
A cut-up roof with four dormers and a turret. Standing seam does not forgive a bad set-out, and every panel had to be measured off the building rather than off the plans.
What we did
We modelled the panel runs before ordering, hand-formed the turret flashings on site, and ran a continuous ridge vent the length of the main span.
The result
A roof rated well past the owners' time in the house, and a measurable drop in summer cooling load.
Placeholder case study. This job is illustrative — Roofave is not a real company and this work did not take place.
You click. We climb. Deal?
Tell us what you need and we will handle the rest. No ladders required on your part.
